Indoor Weather Station - 8 channels

Very easy to set up. I was impressed by how consistent the sensors are - if you line all 5 up they are equally calibrated in both tempreature and humidity readings. It is also possible to calibrate individual sensors in the display unit if required. The only issue I have is that the unit can work with 8 sensors, but is provided with 5 sensors. I can't find anywhere to buy just extra sensors...

Quality seems high, range of functions is good, setup is relatively easy. The measured values of the sensors agree well with each other and are also in the range of other measuring devices, so should be sufficiently accurate. Only in a test with high humidity (bathroom) were there clear differences between the sensors and other measuring devices, but this could also be due to condensation. The range of the sensors is good, even through several walls and concrete ceilings. What is not clearly stated in the description or instructions: The sensor data is saved every 5 minutes on the optional micro SD card (this may not be recognized if it is too large or has an exotic format) in a CSV table that continues until the end of the year, then a new file is created. The device gets the date and time using a radio clock. However, the table does not contain the channel assignment (which room) that you can select for the display, so you have to remember separately which sensor was where, especially if you change the position.

The central unit works well and is precise enough to adjust the temperature of the radiators in the different rooms of the apartment. It was very useful during the winter of 2022/2023 ;-) The only small "downside" concerns the size of the monitor, a little too small for distant reading.

Did you also take the temperature from the main unit?

Perfect for my needs: one in each room and one outside allow me to keep the temperature and humidity under control. I can air condition the house absolutely perfectly. No problem "talking" with the control unit, even the sensor placed furthest away (about 10 meters and with two walls in between).

Nothing to adjust, the sensors are detected automatically as soon as the batteries are installed. The brightness is adjustable. Temperatures are archived per year in CSV format if an SD card is present, one file per sensor. The software is to download. The files are exported in the C:\\Users\\Public\\WH3000 directory, which is obviously easy to find with the file explorer. The sensors can be used outdoors if they are protected from runoff.

Excellent product, the only improvement I see is the possibility to choose what to display, alternatively the graph of all eight channels.

Product that works very well at the moment. Great precision. Transmitters pass through stone walls. Curves saved. Simple and efficient PC interface. Completely standalone, No need for a smartphone or to give any information on the internet. Adjustable brightness (up to off) Alarms Only drawback: expensive.

Practical, easy to install. Too bad the screen is so small.