Factory Seconds
Item: EX10021065
|Model: S-LS-35
Laboratory Power Supply - 0-30 V - 0-10 A DC - 300 W
€109.00
€119.00
Qty
Discount
Per item
3+
5%
€103.55
5+
10%
€98.10
10+
15%
€92.65
Key features
- DC voltage adjustment range: 0-30 V
- Current adjustment range: 0 - 10 A
- Large LED display for rapidly monitoring active output current and output voltage values
- Overheat, overvoltage and overcurrent protection
- Rubber feet - prevent slipping and scratches to work surface
- Smart temperature-controlled fan
Accessories
Delivery details
Returns and warranty
Downloads
Good power supply at a good price
I have relatively easily changed the power supply so that with a toggle switch I can turn the output on and off, and also "short" the output briefly (through suitable resistance) so that the current limiter can be adjusted briefly (torque switch)!
BLACK FRIDAY ENDS IN
0
d
:
0
h
:
0
min
:
0
s
Similar categories
Technical details
Type
SWITCHING
Colour
Black
Display
LED
Voltage [V]
230
Power [W]
300
Ripples
CV: ≤ 10 mV (RMS) / CC: ≤ 20 mA (RMS)
Connector [mm]
Output sockets, mains connection socket, grounding output
Protections
OCP, OVP, OTP
Resolution
100 mV/10 mA
Rated current [A]
10
Line regulation
CV: ≤ 0.01 % + 5 mV / CC: ≤ 0.01 % + 5 mA
Load regulation
CV: ≤ 0.01 % + 5 mV / CC: ≤ 0.01 % + 5 mA
Storing humidity
< 70
Operating humidity [%]
< 80
Storage temperature [°C]
-10 - 70
Working temperature range [°C]
0 - 40
Overvoltage protection
Yes
Over current protection
Yes
Dimensions (LxWxH)
28 x 13 x 18.5 cm
Weight
1.98 kg
Shipping dimensions (LxWxH)
35 x 18 x 21 cm
Shipping weight
2.2 kg
Delivery package
- Bench power supply S-LS-35
- Power cable
- Instruction manual
Product Description
Laboratory Power Supply - 0-30 V - 0-10 A DC - 300 W
The bench power supply S-LS-35 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply is very quiet and is perfect for use in schools or for hobbies. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in development or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work.
Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED display, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage.
With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs.
This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use.
This power supply has special knobs that allow you to individually adjust the desired current. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 10 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs.
The power supply also has a built-in overheat protection which starts the cooling fan as soon as the device temperature rises above 40 °C. The fan ceases to run once the device reaches 35 °C.
Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Ratings & reviews
Ratings & reviews
4.3
Based on 7 reviews
Sort by :
I have relatively easily changed the power supply so that with a toggle switch I can turn the output on and off, and also "short" the output briefly (through suitable resistance) so that the current limiter can be adjusted briefly (torque switch)!
Show original review
I needed a power supply for my electronics workshop that could provide more volts and more amperes. This handy little cousin could give me that. Fast delivery and I use the device every day. Gin and good deal.
Show original review
Super good product, it can be used for numerous experiments.
Show original review
I bought the device for gold plating with electroplating. I just tried it yesterday. It works, is easy to use. Small, handy.
Reply from
Thank you for your positive and helpful feedback. We look forward to a reunion. See you soon and have a nice day!
Show original review
The display of volts and amperes would be nicer with analogue instruments, even if you would then be able to read behind the decimal point less accurately
Reply from
Thanks for your suggestion. We love good ideas! We will look at your feedback carefully and do our best to implement it.
Show original review
No comment provided.
Show original review
No comment provided.
Show original review
Frequently asked questions
Is this power supply digital or analogue?
The S-LS-35 power supply is analogue.
Trusted by experts worldwide
over 16 years
of ecommerce experience
3 MILLION
people bought our products