Gasless MIG Welder - 160 A - 60 % duty cycle - TIG Liftarc - MMA

The clear control panel ensures all values are easily monitored. The selection of the welding method between FLUX, TIG Liftarc and MMA is just as easy. At full power, the cored wire welder achieves 160 A and 60 % duty cycle, allowing you to reliably tackle even complex repair and renovation work. There is an integrated compartment for the wire spool. Depending on the nature and diameter of the welding wire (0.8 / 0.9 / 1 mm), you can select the appropriate mode on the control panel to achieve optimal welding results. The gasless MIG welding machine is designed for all metalworking projects in production, workshops, metalworking shops or trades.

The TIG welding process uses Liftarc ignition to activate the arc. This process has the advantage over a high-frequency start of not influencing or incapacitating nearby sensitive electronic devices such as smartphones, computers or control panels. You can easily control the amperage up to 130 A via the control panel. MMA welding mode is primarily used for iron or copper, as well as for alloys such as cast iron or steel. As you do not need gas to weld with a coated electrode, you can also use the device in adverse conditions such as wind. The Arc Force function enables optimal welding results by maintaining a stable arc.