Pipe Bending Machine - manual - for square pipes

Bend square and rectangular pipes fast and with precision using this tool. To change the bending angle, turn the height-adjustable middle roller up or down using the threaded rod of the hand press. The two outer rollers are fixed in place as counter poles.

The long crank gives this bender excellent power transmission. Once the pipe is placed between the three rollers, crank it in one direction. If the workpiece does not yet have the desired curvature, simply readjust the hand press and crank back in the other direction. Repeat this process until you've reached the desired bend angle.

With this pipe bending tool, you can work with soft steel, copper, and aluminium in the following sizes:

• Structural steel (mm): 20 x 20 x 1.2 / 25 x 25 x 1.5 / 30 x 30 x 1.5 for a minimum radius of 180 mm and minimum diameter of 450 mm;
• Copper in (mm): 20 x 20 x 1.5 / 25 x 25 x 1.5 / 30 x 30 x 1.75 for a minimum radius of 170 mm and minimum diameter of 500 mm
• Aluminium (mm): 20 x 20 x 1.75 / 25 x 25 x 1.75 / 30 x 30 x 2 for a minimum radius of 200 mm and minimum diameter of 500 mm

Whether it’s for factory installations, heating systems, or DIY projects: quickly bend square pipes to your exact needs with the steel pipe bender. The process applies gentle pressure, so your workpieces won’t be damaged or break. For added safety, secure the hand pipe bender to a workbench or sturdy surface using the pre-drilled mounting holes.