Beam Scale - calibrated - 1,500 kg / 500 g - 12 x 120 cm

Not every object has the right shape for a floor scale. With the weighing beams you can adjust the weighing surface to the object, be it pallets in special sizes, tree trunks or other uneven objects. As a result, the calibrated beam scale meets the specific requirements in trade, industry or forestry, such as agriculture. Due to the separate display, the heavy-duty scale can be used particularly flexibly.

The calibrated industrial scale by tem has two weighing ranges. Up to 600 kg can be measured with a maximum deviation of 200 g, for objects of up to 1,500 kg, the deviation can be up to 500 g. The values are displayed on an external 2 display. In addition, it warns in case of overload and displays the current battery level. The display is connected to a cable and can be mounted to the wall if necessary.

The beam scale is operated with a battery. It has a battery life of up to 100 hours and an amazing endurance. A status indicator warns you before the battery dies. The 12 x 120 cm weighing beams are made of robust steel. Depending on the position on the ground, you can increase or decrease the weighing surface. Quick connectors connect to the display. The functions taring and zeroing can be used for weighing.

The beam scale by tem complies with the regulations for trade. This is confirmed by the quality mark M on a green background. It is already calibrated and gauged at delivery. The calibration holds for two years after first use, but should again be certified by an authorised person, depending on national regulations. Only then does the scale receive its calibration sticker. After two years, the scale can be re-calibrated at the Weights and Measures Department. You will also receive a declaration of conformity, which you should keep with the scale.

Note: Due to legal requirements, the scale cannot be delivered to Switzerland.