Factory Seconds
Item: EX10020227
|Model: S-MMA-200PI.2
Electrode welder - 200 A - Hot Start - LED Display
€139.00
Qty
Discount
Per item
3+
5%
€132.05
5+
10%
€125.10
10+
15%
€118.15
Key features
- Powered by up to 200 A welding current
- Precise and clear LED display
- Clean welding results because of the Hot-Start-function
- Modern IGBT inverter-technology
- Lasting duty cycle at 60%
Accessories
Delivery details
Returns and warranty
Downloads
Welding machine
Professional equipment very well protected for shipping, ultra fast delivery, I recommend!
Technical details
Voltage [V]
230
IP protection class
IP21S
Efficiency [%]
80
Duty cycle for 40°C [%]
60
Input power [kVA]
5.8
Power factor
0.73
Max. input power [kVA]
7.4
Insulation class
F
Max. input current [A]
32
Max welding current [A]
200
Min welding current [A]
20
Rated Input current [A]
25
ARC-Force
No
Anti Stick
No
Hot Start
Yes
MMA cable
2 m
Ground cable
2 m
Dimensions (LxWxH)
35 x 12.5 x 22.5 cm
Weight
5.7 kg
Shipping dimensions (LxWxH)
44 x 22 x 30 cm
Shipping weight
7.2 kg
Delivery package
- Electrode welder S-MMA-200PI.2
- E-Hand cable (2 m)
- Earth cable (2 m)
- Power cable (2 m)
Product Description
Electrode welder - 200 A - Hot Start - LED Display
The electrode welder S-MMA-200PI.2 with IGBT inverter-technology by Stamos Germany combines power - up to 200 A - with an easy to use, portable design. These characteristics mean that the welder can be used for welding inside a workshop or factory, as well as for reparation or maintenance work outdoors.
Installation and maintenance of rails, stairs, gates and doors, containers or objects made from metal can be finished in a professional way. The E-Hand or MMA device welds materials like steel, iron, cast iron, nickel, copper or aluminium from 1.5 mm thickness.
The electrode welder has been designed for an efficient and practical operation. Clean and durable welding seams can be achieved in minimal time. The welding current can be seamlessly adjusted with a regulator and goes up to 200 A. The LED display informs of the current parameters.
At the full power of 200 A, the device has a duty cycle of 60 percent. The power can be regulated down to 155 A which increases the duty cycle for a longer operation without pausing. You do not need any protective gas. The E-Hand welder can be used and will work at great precision, even in adverse circumstances, for example with strong winds.
The Hot-Start-function of the electrode welder procures an automatic and short-term increase of the welding current. Thanks to this “Hot Start”, the starting point is immediately heated to the optimal temperature and the electrodes do not clog. You get perfect welding results from the first.
The consistent operational reliability of the E-Hand welder is ensured by the ventilator, the overheat protection and the information displayed on the LED display. The device has a carrying strap for easy transportation.
Accessories
Ratings & reviews
Ratings & reviews
4.7
Based on 78 reviews
Sort by :
Professional equipment very well protected for shipping, ultra fast delivery, I recommend!
Show original review
Fast delivery, powerful and high-quality product, simply overall satisfaction with the ordered goods. Thank you for fast arrangement.
Show original review
I tested this welder, it should be noted that I currently work as a NDT inspector and before that as a welder in Ansaldo Breda (Sofer) in Pozzuoli Naples. I tried basic electrodes first of 2.5 (AWS E 7018) and then of 3.2 and I must say I was satisfied... I recommend it to anyone who likes to have a welding machine that is suitable not only for small jobs but also for more important activities.
Show original review
I recommend it one hundred percent, the only drawback is the cables are two meters long, you have to bring the machine closer every few minutes.
Show original review
For me it is a good welder, good and the price was good at the time, now it will cost more.
Show original review
At the moment it is going perfect, I have soldered several hours in a row on different days and everything is correct
Show original review
Excellent welder, welder with 3.2 basic electrodes without problems, high work cycle, does not heat up because it has excellent cooling and is very powerful. 12 mm with 3.2 basic electrodes for 10 hours a day for a week is no problem)
Reply from
Thank you for your positive and encouraging opinion. We hope to be able to help you achieve your goals again. We wish you a good day!
Show original review
Very good probes I love it
Show original review
Just received my welder, just tried it, it's so good, it can just weld so it lasts, so simple a welding work, so good
Reply from
Thank you for your positive and constructive feedback. We look forward to being able to welcome you as a customer in our online store in the future as well. Have a continued good day!
Show original review
I am satisfied with the purchase, I can finally weld small objects, something I couldn't do with another welder I purchased a few years earlier. I gave it five stars because it deserves them all. I highly recommend it
Show original review
Trusted by experts worldwide
over 16 years
of ecommerce experience
3 MILLION
people bought our products