Diamond Core Drill Bit - 2200 W - 1300 rpm

On a construction site, time is money, and the demands on the machines used are correspondingly high. With the core drill from MSW, you can reliably drill holes in hard building materials such as concrete, masonry or asphalt. Use a drill stand (not included) when drilling, then even large holes with a diameter of up to 202 mm are possible. Or for hard walls, use the micro-hammer mode, which creates a very fast yet soft hammering effect.

With the diamond core drill you have access to a power of 2200 W and a maximum speed of 1300 rpm for hand-guided core drilling up to a diameter of 162 mm. For best drilling results, use two power levels, taking the largest diameter drill at the lowest speed. With a core drill stand (not included) you not only increase the precision of the drilling, but also use larger drill bits up to 202 mm. Whether hands-free or with a stand, the core drill is intended for professional users who already have experience with similar equipment due to its performance.

When drilling, rely on reliable water cooling. A connection is directly integrated in the unit. This reduces wear on the drill, you maintain the machine less and achieve a longer service life. 

Use diamond core drills with different diameters, which you connect securely to the tool via the holder. Use the concrete core drill to drill into reinforced concrete, cement, masonry, asphalt and natural stone. The 2.8 m long power cable offers you maximum freedom of movement. Thanks to the residual current protection circuit (PRCD - Portable Residual Current Device) integrated in the cable, you always use the unit safely. If there is a short circuit in the area of the granite core drill or the cable, the unit will immediately stop operating.