Factory Seconds
Item: EX10060483
|Model: MSW-RM18S
Bead Roller - 440 mm
€179.00
Qty
Discount
Per item
3+
5%
€170.05
5+
10%
€161.10
10+
15%
€152.15
Key features
- Suited even for thick metal sheets like steel (1.21 mm) or aluminium (1.8 mm)
- Easy to operate with a crank for pulling the sheet through
- Sturdy steel construction, perfect for metalworking
- Comprehensive set of dies for a variety of channels or flanges
- Flexible to mount in a vice
Delivery details
Returns and warranty
Downloads
edging machine
the price/value ratio is adequate, it works well for me so far
BLACK FRIDAY ENDS IN
0
d
:
0
h
:
0
min
:
0
s
Similar categories
Technical details
Cutting dies
1 pair (diamter: 53 mm. thickness: 8 mm)
Number of dies
7 pairs (Ø interior: 22 mm; Ø exterior: 55 mm)
Bead forming dies
3 pairs (6.35 mm; 9.53 mm; 12.7 mm)
Flange forming dies
3 pairs (1.6 mm; 3.2 mm; 6.35 mm)
Max thickness of the sheet [mm]
Steel: 1.2 / aluminium: 1.8
Max forming width of the sheet [mm]
440
Dimensions (LxWxH)
74 x 32 x 31.5 cm
Weight
25.3 kg
Shipping dimensions (LxWxH)
76 x 31 x 17 cm
Shipping weight
26.6 kg
Delivery package
- Bead Roller MSW-RM18S
- Hand crank
- 3 bead-forming die sets
- 3 flange-forming die sets
- Cutting die set
- Key
- Instruction manual
Product Description
Bead Roller - 440 mm
The bead roller enables you to easily and directly work sheet metal. Special dies help you to pull grooves or flanges. In addition, the cutting dies enable you to easily trim sheet metal.
The bead roller is perfectly designed for shaping different types of metal sheets. The device has enough pressing power to work or even sever steel sheets with a thickness of 1.21 mm and aluminium sheets with a thickness of 1.8 mm. For use in a workshop or on a construction site, the device can be easily mounted in a vice.
The bead roller is operated mechanically with a hand crank which turns two rollers which are positioned 50 mm apart and form a gap with a width of 440 mm. Dies are mounted on the ends of the rollers which press various forms into the sheet metal. Turning the crank pulls the sheet into the device.
The device's sturdy construction from cast iron and steel sets it apart and offers enough stability to forcefully press grooves into the sheet. The bead roller is equipped with three pairs of dies for forming different-width grooves and flanges in metal. The device also comes with a die set for cutting sheet metal.
About the brand
Ratings & reviews
Ratings & reviews
4.6
Based on 14 reviews
Sort by :
the price/value ratio is adequate, it works well for me so far
Show original review
The product is beyond expectations, rigid, does its job perfectly and the price was great.
Show original review
The display is apt. Fast delivery. The price is favorable. I have to properly test the product - I hope it will serve for a long time..
Show original review
Very honest for the foreign money!!
works well
Show original review
Works great for my small hobby jobs in the garage.
Show original review
The machine is robust, the machine could also "bead" even thicker sheet metal, but the machine body has to be reinforced for this. Absolutely recommended for the price. The screws should be replaced, just as a precaution.
Show original review
I wasn't so sure when ordering, I'm very satisfied, great value for money
Show original review
Great price performance
Show original review
I got the necessary bends done. Good price and lots of rolls included. The body is a little flexible, but it did not affect the quality of the work
Show original review
Frequently asked questions
What is the crank made of?
The crank is made of plastic and has a non-slip handle.
Trusted by experts worldwide
over 16 years
of ecommerce experience
3 MILLION
people bought our products