Float switch - 12 V 16 A / 24 V 8 A

To prevent the bilge in your boat from becoming too submerged, it must be pumped out regularly. With the MSW float switch, you always have the water level in view. If the water level is too high, the bilge switch reacts automatically and activates the bilge pump. You do not have to check the bilge on sight and can devote your full attention to navigation.

The compact bilge switch can be easily mounted at the bottom of the bilge. The floating arm of the lever reacts to the water level. From a certain angle, which is reached at approx. 60 mm water height, the switch automatically switches on the pump. If the water falls below 30 cm during pumping, it is switched off again.

The float switch is connected to the pump via two robust cables. The cables have a length of 1 m and a thickness of 16 AWG, so that they can be routed flexibly without losing stability. The bilge switch can be operated with 12 V (16 A) as well as 24 V (8 A) and is therefore suitable for a wide range of direct current sources.

The material of the switch is extremely durable and completely rust-free as well as corrosion-resistant. This makes it ideal for use in wet environments such as a bilge, but also in engine rooms or basements. Use the float switch to prevent flooding or too high a water load!